Close

    • BenzBoost member MR747 breaks into the 9's with his stock internal Weistec supercharged M156 W204 C63 AMG

      At one point people would have told you this was impossible to achieve. Yet, here we are. @MR747 managed to break into the 9's with his W204 C63 AMG using a 3.0 liter Weistec M156 twin screw supercharger. He did it with a stock internal M156.


      Note, this is not the P31 option with the stronger factory engine internals. That makes the achievement all the more impressive.

      Let's go over the mod list

      Ms109 fuel
      Stock Fuel system and Weistec stage 3 injectors
      Front and back seats out for weight loss
      Stock Bottom End
      Stock Heads
      60mm Pulley
      IAH rebuilt gearbox
      Custom Ceramic Coated intake pipes
      MBH headers exhaust dropped at mufflers

      A little bit of weight loss but nothing too crazy there. He didn't even touch the heads. A great launch with a 1.565 60 foot deserves a fair share of the credit.

      Simply a remarkable achievement with more in it if he wants it:


      This article was originally published in forum thread: Finally got there started by MR747 View original post
      Comments 18 Comments
      1. MR747's Avatar
        MR747 -
        3.0 sticky Click here to enlarge
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by MR747 Click here to enlarge
        3.0 sticky Click here to enlarge
        Yeah I figured I just wanted to double check.
      1. gzim335's Avatar
        gzim335 -
        Beast well done brother
      1. cturbos's Avatar
        cturbos -
        MR747
        What is Custom Ceramic Coated intake pipes?
      1. MR747's Avatar
        MR747 -
        Click here to enlarge Originally Posted by cturbos Click here to enlarge
        MR747
        What is Custom Ceramic Coated intake pipes?
        pic attached

        Attachment 53775
      1. MR747's Avatar
        MR747 -
        I done a retune on friday night nearly broke 700WHP so close
      1. Mag1c Carp3t's Avatar
        Mag1c Carp3t -
        Those intakes are serious. Were they required for the blower or could they be of advantage on a NA application? Any relocations of anything in the engine bay to run those intakes besides removing the stock intakes boxes?
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by Mag1c Carp3t Click here to enlarge
        Those intakes are serious. Were they required for the blower or could they be of advantage on a NA application? Any relocations of anything in the engine bay to run those intakes besides removing the stock intakes boxes?
        @MR747
      1. MR747's Avatar
        MR747 -
        I'm not sure if they will work on N/A app they work on FI and IATs are actually lower with them

        We designed so only the water bottle needed to be trimmed down a little
      1. MR747's Avatar
        MR747 -
        i bettered the time over the weekend

        Attachment 53997Attachment 53997
      1. Sticky's Avatar
        Sticky -
        Whatever you ran your mph is almost as high as their kph...
      1. MR747's Avatar
        MR747 -
        hahahha i never noticed that
      1. CLSAMG63's Avatar
        CLSAMG63 -
        Any info on how we can get our hands on that intake? Very interested. Also.... any before and after on the IAT's? Congrats on your times. Impressive that the stock internals are holding up with the smaller 60mm pulley.

        Thanks
      1. MR747's Avatar
        MR747 -
        YOu can purchase the intakes through me cost will be 1500 AUD + shipping includes ceramic coating and filters turn around time is 3 weeks

        ONly before and after i can tell you is previously end of QTR mile runs 30 degrees after intakes was 20 degress
        Cruising around previous intake temps were 50 degrees after intakes 42-44 degrees

        I dont have any screen shots just what i can tell you

        And you also get the supercharger whine which is a added bonus

        check out my instagram mr74732 if you want to hear the car
      1. MR747's Avatar
      1. Sticky's Avatar
        Sticky -
        Why didn't you post the vid?

      1. MR747's Avatar
        MR747 -
        I meant to Click here to enlarge
      1. marioflex's Avatar
        marioflex -
        ​Nice Video !!