• 632 wheel horsepower single turbo BMW 335i versus a modified C5 Z06 on nitrous

      Regular BimmerBoost readers will be familiar with the 335i in this video which belongs to BimmerBoost member Ak335i. The car is currently the most powerful automatic N54 based vehicle BimmerBoost is aware of putting down a very respectable 632 horsepower to the wheels courtesy of its Precision 6466 single turbo upgrade. The 335i is in action in the video below versus a C5 Z06 on nitrous which beats the modified Ford Mustang GT500 in the preceding video.


      The race against the C5 Z06 takes place at a roll speed of approximately 60 miles per hour. It's a very good race with the 335i appearing to get a slight jump but the Z06 able to close the gap. The race with the GT500 shows that this Z06 is definitely a seriously quick car.

      Enjoy the videos below.



      This article was originally published in forum thread: C5Z Nitrous and GT500 race. Blown motor. Bonus 335i ST vs Winner! started by Ak335i View original post
      Comments 43 Comments
      1. Toxic 335's Avatar
        Toxic 335 -
        Wow….how does that c5z compare to the trans am with 150shot?
      1. Ak335i's Avatar
        Ak335i -
        Click here to enlarge Originally Posted by Toxic 335 Click here to enlarge
        Wow….how does that c5z compare to the trans am with 150shot?
        he beat him... ill dig up a vid.. C5z is #1 on our KOTS list, Trans Am is #2 im #3 ... i couldnt shake the t/a as my tranny was not holding up anymore by the time i ran him
      1. Ak335i's Avatar
        Ak335i -
        Click here to enlarge Originally Posted by Toxic 335 Click here to enlarge
        Wow….how does that c5z compare to the trans am with 150shot?
        here ya go... they are both stupid fast this thread should give an idea of how fast a 6466 is on 25psi its much fast Click here to enlarge

      1. Toxic 335's Avatar
        Toxic 335 -
        gotcha! So spring time u gonna take #1 .Click here to enlarge
      1. Ak335i's Avatar
        Ak335i -
        Yup. Hope so Will much interesting. So transmission. Much shift. Very swap
      1. DFM's Avatar
        DFM -
        Click here to enlarge Originally Posted by Ak335i Click here to enlarge
        Yup. Hope so Will much interesting. So transmission. Much shift. Very swap
        Post of the year.
      1. Toxic 335's Avatar
        Toxic 335 -
        LOL great post
      1. Blitz535i's Avatar
        Blitz535i -
        Damn, the smoke trail off the GT500 was insane...
      1. Ak335i's Avatar
        Ak335i -
        Click here to enlarge Originally Posted by Blitz535i Click here to enlarge
        Damn, the smoke trail off the GT500 was insane...

        yea.. reminds me of when i blew the stock turbos. it was intense
      1. E90Company's Avatar
        E90Company -
        What happened with the GT500 exactly?
      1. Ak335i's Avatar
        Ak335i -
        Click here to enlarge Originally Posted by E90Company Click here to enlarge
        What happened with the GT500 exactly?
        It threw the #8 rod thru the motor... it was a shop car so the guy is very yolo lol
      1. E90Company's Avatar
        E90Company -
        Click here to enlarge Originally Posted by Ak335i Click here to enlarge
        It threw the #8 rod thru the motor... it was a shop car so the guy is very yolo lol
        Ouch. It was stock?
      1. 135pats's Avatar
        135pats -
        If it decided to let a rod go bone stock..yikes.

        That was a ridiculous amount of smoke lol.
      1. Ak335i's Avatar
        Ak335i -
        Click here to enlarge Originally Posted by E90Company Click here to enlarge
        Ouch. It was stock?
        i believe the motor was stock with the boost turned up... not 100% sure... @Justin@BoostAddictions?
      1. Stucks's Avatar
        Stucks -
        I thought those new Shelby motors were forged and stuff? Able to handle 800+ whp easy? like the 03/04 cobra motors...
      1. 135pats's Avatar
        135pats -
        Click here to enlarge Originally Posted by Stucks Click here to enlarge
        I thought those new Shelby motors were forged and stuff? Able to handle 800+ whp easy? like the 03/04 cobra motors...
        Not much out there that’s sturdier than the ‘03 Terminator motor. But either way, throwing rods around the block with a more or less stock car is lame. Sounds like the boost got cranked up a bit, but still. Shouldn’t happen.
      1. ezec63's Avatar
        ezec63 -
        Click here to enlarge Originally Posted by Stucks Click here to enlarge
        I thought those new Shelby motors were forged and stuff? Able to handle 800+ whp easy? like the 03/04 cobra motors...
        The coyotes 5.0's are the real gem in the mustang lineup
      1. Stucks's Avatar
        Stucks -
        Click here to enlarge Originally Posted by ezec63 Click here to enlarge
        The coyotes 5.0's are the real gem in the mustang lineup
        haha trust me, I know all about them! my buddy with a 2013 boss 302 never lets me forget! and he has a 510whp 03 cobra vert and 850whp 03 mach 1! Ever since he got the boss a year ago, its all ive seen him driving around in. cobra and mach 1 just sit in the garage -__- (mach 1 runs on c16 so its expensive to drive that car)
      1. BoostAddict's Avatar
        BoostAddict -
        Click here to enlarge Originally Posted by Ak335i Click here to enlarge
        i believe the motor was stock with the boost turned up... not 100% sure... @Justin@BoostAddictions?
        Pretty sure it's just pulley and tune car. I heard them say something about 750+whp, but I don't actually know.
      1. 135pats's Avatar
        135pats -
        Click here to enlarge Originally Posted by Justin@BoostAddictions Click here to enlarge
        Pretty sure it's just pulley and tune car. I heard them say something about 750+whp, but I don't actually know.
        At first I thought it was lame a tune and pulley only Cobra was having parts run in opposite directions. But 750+ is up there. So....new motor....built Click here to enlarge