Close

    • Swedish tuner PPF (Pure Performance Factory) sets new BMW M54 inline-6 horsepower record with custom built turbo M54 hitting 801 wheel

      A big congratulations is in order for PPF (Pure Performance Factory) of Sweden for obliterating the M54 horsepower record and setting a new and very high bar for the platform. How does 801 wheel horsepower on the M54B30 sound? Well to BimmerBoost it sounds absolutely amazing as this pushes the platform to a whole new level. For years now the M50,S50, and S54 motors have gotten all of the attention out of the M5X engine family and it is nice to see the M54 coming into its own.

      Specs on the vehicle are an 84.5mm bore M54B30 with a balanced crank, PPF H-profile rods, 8.5:1 compression CP pistons, and ARP bolts. The cylinder is ported by PPF with +1mm Supertech intake valves, stock sized inconel exhaust valves, with PPF valve springs and retainers. The turbo making the power possible is a Precision PT6765 .82ar. The motor also gets S50 independent throttle bodies. The car is tuned on a standalone and runs E85 fuel.

      Pictures of the car and dynograph below along with a bit of history on how it has come along and gotten to where it is. Congrats to PPF and @JimmyOberg :






      This is the car back in 2009:


      Looks pretty fast yes? I find the shape of it very aerodynamic.

      In all seriousness, it's gone through quite a metamorphosis, starting like this:


      At this time Jimmy was looking to do a very high spec N/A build, including the fitment of the S50 ITBs pictured above. (This was an experience we shared; the adaptation of an ITB manifold onto an M54) To say that this project was just a pile of parts bolted onto the car would not be doing Jimmy (or PPF) justice. The ITB project was pretty serious, with a lot of Jimmy's time spent here:


      Doing this:





















      During the summer of 2010, Jimmy began to talk about doing another turbo project. (His previous toy was a 700hp turbo E34) So it wasn't a surprise in September of 2010 when the following build plan was announced:

      *SPA Exhaust manifold
      * Precision SC6262 Billet Turbo
      * Presision 44mm Wastegate
      * 3" Steinless exhaust with 2 SIMONS silencers
      * PPF 50mm BOV
      * 450X300x75 Intercooler
      * BMC Airfilter
      * Link G4 Atom EMS
      * Audi ignition coils
      * Siemens DEKA 895cc injectors
      * Bosch 044 fuelpump mounted in the tank.
      * Aeromotive AN6 regulator
      * Modified fuelrail

      The goal was 450rwhp on a stock M54B30 bottom end on E85 fuel.

      Building the turbo manifold:




      Installation completed at PPF, and on the dyno to start tuning:


      Super clean engine bay:






      Then I got this in an email, and I knew Jimmy and PPF must have been happy:


      So that takes us to October of 2010.

      The next step for the car was an M3 body for 2011:










      Finished result:






      Also in progress was a new turbo manifold and built engine:








      Also, in the spring of 2011, a PT6765 turbo was added to the engine along with the turbo manifold pictured above. This netted a solid 516rwhp at 1 BAR (14 PSI) of boost on the stock M54B30 engine.

      Over the winter of 2011/2012, a new engine was built to the following specs:


      • M54B30 Block, 84.5mm bore
      • CP Pistons 8.5:1 CR
      • PPF Rods
      • PPF Ported head
      • PPF Valvesprings + Retainers
      • Supertech +1mm intake valves
      • Supertech inconel exhaust valves
      • PPF M50 turbo cams
      • VANOS delete
      • ARP M12 head studs
      • ARP for the maincaps
      • SS Exhaust manifold
      • Precision PT6765 Turbo
      • Precision 46mm Wastegate
      • 3.5" SS exhaust with two SIMONS mufflers.
      • PPF BOV
      • PPF Fuelrail
      • Bosch 1700cc injectors
      • Aeromotive AN8 FPR


      In addition to the above, the S50 ITB manifold pictured previously was added, although using the S50 OEM plenum and runners instead of the billet aluminum pieces.

      In April of 2012 the car was sold to Fredrik the current owner.

      In May 2012 the car made 513rwhp @ 0.95 BAR on the built engine. (8.5:1 compression ratio) I'm told the car remained in this state of tune until December 2012 where it made 570rwhp @ 1.2 BAR before a head gasket issue arose.

      Then the stock head gasket was replaced with PPF Coppering head gasket mentioned previously, and we now have an incredible M54 world record!
      This article was originally published in forum thread: M54B30 801whp/881wnm World record!!!? started by Erikzzon View original post
      Comments 71 Comments
      1. 1Zed4's Avatar
        1Zed4 -
        OMG! I knew my M54B30 was capable of more than that! Damn I miss my ESS TS2 Z4 more and more. . . .
      1. Bees323's Avatar
        Bees323 -
        hey erikzzon is e85 the only thing you run in the car do u have a pump gas tune? if so how much hp does it put down on pump gas?. Asking only because i want my e46 to be like that one day and e85 pumps are rare where i live...
      1. Erikzzon's Avatar
        Erikzzon -
        Click here to enlarge Originally Posted by Bees323 Click here to enlarge
        hey erikzzon is e85 the only thing you run in the car do u have a pump gas tune? if so how much hp does it put down on pump gas?. Asking only because i want my e46 to be like that one day and e85 pumps are rare where i live...

        just run on e85
      1. Bees323's Avatar
        Bees323 -
        more videos please!!!!!
      1. alex@ABRhouston's Avatar
        alex@ABRhouston -
        I should have thought @PEI330Ci would have been involved with this Click here to enlarge


        When I saw the ITB setup on there, i instantly thought of a black 330 ci that I intently watched being built over a couple of years, and its tragic ending Click here to enlarge



        I'm glad to see you here man!


        We've built a few big M54 engines, fully built as well- what happened to them? Well, the owners collected their engines and disappeared in the world Click here to enlarge
      1. Jacob_DK's Avatar
        Jacob_DK -
        M54B30 putting out 801whp now THATS what im talking about.

        BIG congrats, and what a beautifull build. scandinavia rocks.
        And to think i took out my M54 to get some real power with a M50.. Click here to enlarge Shame on me.! Weeell i feel a new project needs to be born. Click here to enlarge
      1. inlineS54B32's Avatar
        inlineS54B32 -
        Click here to enlarge Originally Posted by AlexQuattro Click here to enlarge
        That dyno sheet looks a little bit ''shady''. I don't want to start a pissing match here, but I thought all torque and horsepower lines crossed at 5252 rpm. Isn't horsepower just a calculation based on torque and rpm? Here's what I mean: http://www.epi-eng.com/piston_engine...and_torque.htm

        Now, I DO REALIZE that instead of ft-lbs, torque is expressed in Newton meters, which could be why both lines don't cross at 5252, but having said that, the maximum torque value seems to be 801 Nm, NOT 881 Nm?!
        It is because of what you said - if the torque is being measured in nm instead of ft-lb. If you look at 5252ish, and see what the power is at (looks to be around 630ish?) - and then convert what torque would be in nm here, it looks right on the money - 850ish nm

        Not sure what you mean about the peak torque thing though (last sentence) - the graph says 881 not 801 for the max X-axis for torque.
      1. inlineS54B32's Avatar
        inlineS54B32 -
        Amazing job, amazing car - and amazing power curve. Looks like it would be a fun car to drive everywhere. Click here to enlarge
      1. inlineS54B32's Avatar
        inlineS54B32 -
        Click here to enlarge Originally Posted by The Ghost Click here to enlarge
        Perfect powerband!!
        It really is. It's a damn good tuned engine, that's for sure.
      1. AlexQuattro's Avatar
        AlexQuattro -
        This is from 1.5 years ago @inlineS54B32...

        I hadn't realized both columns weren't scaled the same, it's all explained on page 1...
      1. Sticky's Avatar
        Sticky -
        Click here to enlarge Originally Posted by Jacob_DK Click here to enlarge
        M54B30 putting out 801whp now THATS what im talking about.

        BIG congrats, and what a beautifull build. scandinavia rocks.
        And to think i took out my M54 to get some real power with a M50.. Click here to enlarge Shame on me.! Weeell i feel a new project needs to be born. Click here to enlarge
        Welcome!